S-Products.com | Products

MP82800-R PRODUCT OVERVIEW

The Mp82800-R is one of the smallest, most advanced two-wire head-mounting µP-based transmitter available. Able to fit in a standard connection head, it is quickly and easily programmed to your exact Pt100 RTD requirements via your personal computer and our Software/Interface, allowing you to stock a single transmitter model to meet all your Pt100 range requirements.

Mp82800-R features
• 2-wire headmount transmitter
• Microprocessor-based
• Pt100 RTD 3-wire input only
• High overall accuracy (typical 0.2%)
• Fully programmable
• Fully linearized
• RFI/EMI protected
• ATEX and / or FM approval
• Optional plug-in readout & head
• 5-Year warranty

SPECIFICATIONS

Input RTD	Pt100 3-wire
Minimum Span	25°C
Output	4..20 mA or 20..4 mA
Linearization	On / Off
Supply	10..40 VDC, Polarity Protected
Supply Effect	0.02%/V
Max. Ripple	10 V PP. Min Vbat=10 VDC
Zero Drift	± 0.02%/°C or ±0.02°C/°C
Span Drift	± 0.01%/°C or ±0.01°C/°C
Long Term Drift	± 0.1%/Year
Excitation Current, RTD	0.1 mA
Sensor Lead Resistance, RTD	500 Ohm max.
Sensor Lead Resistance Effect	0.01°C/Ohm
Open Circuit Detection	Upscale / Downscale
Load Capability	Vbat-10V / 20 mA
Startup Time	30 sec.
Warmup Time	5 Min.
Ambient Operating Temp.	-40...+ 85°C
Storage Temperature	-40...+100°C
Ingress Protection	IP30
Housing Material	Zinc Alloy (ZAMAK 5) epoxy coated
Housing Dimension	43mm Dia. x 27mm H.
Housing Dimension with Read-Out	43mm Dia. x 36mm H.

SENSOR RANGES

Sensor type	Temp. Min. °C	Temp. Max. °C	Span Min. °C
Pt100 IEC751	-200	850	25

Download a printable specifications sheet here.

ORDER INFORMATION

Model
Mp82800-R
-R = Pt100 input only (default)

Options
D / IF / CW / EX / FM

Options explained
-D = Plug-In Loop-Powered readout
-IF = Interface and Software
-CW = Connection Head with Window
-FM = Intrinsically Safe Approval IS/I/1/ABCD/T6
-EX = Intrinsically Safe Approval
ATEX Ex II 1 G EEx ia IIC T4..T6

MANUAL

Mp82700(-H), Mp82800(-R), Mp88700(-H),
Mp88800(-R) and Mp82850-R - December 2004 (600kb)

Manuel d'utilisation MP-transmetteurs - 12/05/2000 (190kb)

SOFTWARE

Serial interface software V3.5 August 2008 (4.5 MB)

This software program is suitable for all microprocessor based transmitters using S-Products' interface for connection to your computer's serial port.

SPRO_MpUser_V35.exe

Please read the readme.1st or install.html file included in zip file for installation instructions.

USB interface software V3.5 August 2008 (4.8MB)

This software program is suitable for all microprocessor based transmitters using S-Products' interface for connection to your computer's USB port.

SPRO_MpUser_V35 (USB).exe

Please read the readme.1st or install.html file included in zip file for installation instructions.