 Features include: small minimum spans, selectable upscale/downscale for sensor break, and selectable voltage or temperature linearity. It is even available with an optional built-in display for local temperature readout. It incorporates highly advanced microprocessor technology to provide high accuracy. |
Mp87800 features
• Microprocessor-based
• Universal input
• Fully linearized (selectable)
• High accuracy
• Choice of current & voltage outputs
• Optional built-in display
• 5 Year warranty |
| |
Input RTD |
Pt100, Pt250, Pt500, Pt1000, Ni100, Ni500, Ni1000, Cu10, Cu100 |
Input T/C |
K,J,L,T,U,E,R,S,B,C,D,N |
Input mV |
|
Input Ohm |
|
Minimum Span |
See table below |
Output DC |
4...20 mA, 20...4 mA, 0…1V and 0…10V |
Linearization |
On / Off |
Zero Drift |
± 0.01%/°C or ±0.02°C/°C |
Span Drift |
± 0.005%/°C or ±0.01°C/°C |
Cold Junction Drift |
± 0.01°C/°C |
Excitation Current, RTD |
0.1 mA |
Sensor Lead Resistance, RTD |
500 Ohm max. |
Sensor Lead Resistance Effect |
0.001°C/Ohm |
Sensor Lead Resistance, T/C |
10 kOhm max. |
Open Circuit Detection |
Upscale / Downscale |
Startup Time |
20 sec. |
Warmup Time |
5 Min. |
Supply Voltage Effect |
0.001 %/V |
Isolation |
500 VDC |
Ambient Operating Temperature |
-10 to 70°C (-4° to 160°F) |
Storage Temperature |
-20 to 100°C (-4° to 210°F) |
Housing Material |
Makrolon |
Dimensions W x H x D |
55 x 75 x 110 mm (2.16” x 2.9” x 4.3”) |
SENSOR RANGES
Sensor type |
Temp. Min.
°C |
Temp. Max.
°C |
Span Min.
°C |
K (NiCr-Ni) |
-270 |
1370 |
50 |
J (Fe-CuNi) |
-200 |
1200 |
50 |
L (DIN Fe-CuNi) |
-200 |
900 |
50 |
T (Cu-CuNi) |
-270 |
400 |
50 |
U (DIN Cu-CuNi) |
-200 |
600 |
50 |
E (NiCr-CuNi) |
-270 |
1000 |
50 |
S (Pt10%Rh-Pt) |
-60 |
1760 |
250 |
R (Pt13%Rh-Pt) |
-60 |
1760 |
250 |
B (Pt30%Rh-Pt6%Rh) |
0 |
1820 |
600 |
Pt100 IEC751 |
-200 |
850 |
25 |
Pt250 IEC751 |
-200 |
850 |
25 |
Pt500 IEC751 |
-200 |
850 |
25 |
Pt1000 IEC751 |
-200 |
850 |
25 |
Ni100 IEC751 |
-60 |
250 |
25 |
Ni500 IEC751 |
-60 |
250 |
25 |
Ni1000 IEC751 |
-60 |
250 |
25 |
Cu10 |
-200 |
250 |
25 |
Cu100 |
-200 |
250 |
25 |
C (W5%Re-W26%Re) |
0 |
2300 |
150 |
D (W3%Re-W25%Re) |
0 |
2300 |
150 |
N (NiCrSi-NiSiMg) |
-270 |
1300 |
50 |
mV |
0 |
1000 |
10 |
Ohm |
0 |
9999 |
100 |
Available power supplies
Order Suffix |
Power Supply |
V1 |
230 VAC ±10% |
V2 |
115 VAC ±10% |
V3 |
24 VDC Isolated |
V4 |
24 VAC |
V5 |
12 VDC Isolated |
V6 |
12 VAC |
|
|
| |
Model
Mp87800
Options
V / IF / D
Options Explained
- IF = Interface and Software
- V = power; select V1-V6 from table below
- D = Built-in readout
|
|
| |
Serial interface software V3.5 August 2008 (4.5 MB) |
|
| |
 This software program is suitable for all microprocessor based transmitters using S-Products' interface for connection to your computer's serial port.
SPRO_MpUser_V35.exe
Please read the readme.1st or install.html file included in zip file for installation instructions.
|
|
| |
USB interface software V3.5 August 2008 (4.8MB) |
|
| |
 This software program is suitable for all microprocessor based transmitters using S-Products' interface for connection to your computer's USB port.
SPRO_MpUser_V35 (USB).exe
Please read the readme.1st or install.html file included in zip file for installation instructions.
|
|
|
 |
