 |
Mp88700-H features
• 2-wire rail-mount transmitter
• Microprocessor-based
• HART protocol
• RTD, T/C, mV and Ohm input
• Fully isolated
• Fully linearized
• High accuracy (typical 0.1%)
• 5-Year warranty |
| |
Input RTD |
Pt100, Pt250, Pt500, Pt1000, Ni100, Ni500, Ni1000, Cu10, Cu100 |
Input T/C |
K,J,L,T,U,E,R,S,B,C,D,N |
Input V |
|
Input Ohm |
|
Minimum Span |
See table below |
Output |
4..20 mA or 20..4 mA |
Linearization |
On / Off |
Supply |
10..40 VDC, Polarity Protected |
Supply Effect |
0.001%/V |
Max. Ripple |
10 V PP. Min Vbat=10 VDC |
Zero Drift |
± 0.01%/°C or ±0.02°C/°C |
Span Drift |
± 0.005%/°C or ±0.01°C/°C |
Long Term Drift |
± 0.05%/Year |
Cold Junction Drift |
± 0.01°C/°C |
Excitation Current, RTD |
0.1 mA |
Sensor Lead Resistance, RTD |
500 Ohm max. |
Sensor Lead Resistance Effect |
0.001°C/Ohm |
Sensor Lead Resistance, T/C |
10,000 Ohm max. |
Open Circuit Detection |
Upscale / Downscale |
Load Capability |
Vbat-10V / 20 mA |
Startup Time |
± 5 sec. |
Warmup Time |
± 5 min. |
Isolation |
500 VDC |
Ambient Operating Temp. |
-40...+ 85°C. |
Storage Temperature |
-40...+100°C. |
Housing Material |
Makrolon |
Housing Dimension W x H x D |
22.5 x 75 x 99 mm (0.89” x 2.92” x 3.9”) |
SENSOR RANGES
Sensor type |
Temp. Min.
°C |
Temp. Max.
°C |
Span Min.
°C |
K (NiCr-Ni) |
-270 |
1370 |
50 |
J (Fe-CuNi) |
-200 |
1200 |
50 |
L (DIN Fe-CuNi) |
-200 |
900 |
50 |
T (Cu-CuNi) |
-270 |
400 |
50 |
U (DIN Cu-CuNi) |
-200 |
600 |
50 |
E (NiCr-CuNi) |
-270 |
1000 |
50 |
S (Pt10%Rh-Pt) |
-60 |
1760 |
250 |
R (Pt13%Rh-Pt) |
-60 |
1760 |
250 |
B (Pt30%Rh-Pt6%Rh) |
0 |
1820 |
600 |
Pt100 IEC751 |
-200 |
850 |
25 |
Pt250 IEC751 |
-200 |
850 |
25 |
Pt500 IEC751 |
-200 |
850 |
25 |
Pt1000 IEC751 |
-200 |
850 |
25 |
Ni100 IEC751 |
-60 |
250 |
25 |
Ni500 IEC751 |
-60 |
250 |
25 |
Ni1000 IEC751 |
-60 |
250 |
25 |
Cu10 |
-200 |
250 |
25 |
Cu100 |
-200 |
250 |
25 |
C (W5%Re-W26%Re) |
0 |
2300 |
150 |
D (W3%Re-W25%Re) |
0 |
2300 |
150 |
N (NiCrSi-NiSiMg) |
-270 |
1300 |
50 |
mV |
0 |
1000 |
10 |
Ohm |
0 |
9999 |
100 |
|
|
| |
Model
Mp88700-H
Options
- H -IF
Options Explained
-IF = Interface and Software
-H = Hart protocol
|
|
| |
Serial interface software V3.5 August 2008 (4.5 MB) |
|
| |
 This software program is suitable for all microprocessor based transmitters using S-Products' interface for connection to your computer's serial port.
SPRO_MpUser_V35.exe
Please read the readme.1st or install.html file included in zip file for installation instructions.
|
|
| |
USB interface software V3.5 August 2008 (4.8MB) |
|
| |
 This software program is suitable for all microprocessor based transmitters using S-Products' interface for connection to your computer's USB port.
SPRO_MpUser_V35 (USB).exe
Please read the readme.1st or install.html file included in zip file for installation instructions.
|
|
|
 |
