MP88710 PRODUCT OVERVIEW





The Mp88710 is the industry's most advanced 2-wire rail-mounting µP-based transmitter. Less than 23 mm (1") wide and mounting on standard DIN rails, the Mp88710 is easily programmed via a personal computer with our interface and software.



Mp88710 features
• 2-wire rail-mount transmitter
• Microprocessor-Based
• RTD, T/C, mV and Ohm input
• Fully isolated
• Fully linearized
• RFI/EMI protected
• Short startup time
• High accuracy (typical 0.1%)
• Small size
• 5-Year warranty


  SPECIFICATIONS
 




Input RTD 

Pt100, Pt250, Pt500, Pt1000, Ni100, Ni500, Ni1000, Cu10, Cu100

Input T/C 

K,J,L,T,U,E,R,S,B,C,D,N

Other inputs

Ohm, mV

Minimum Span 

See table below

Output 

4…20 mA or 20...4 mA

Linearization 

On / Off

Supply 

5...40 VDC, Polarity Protected

Supply Effect 

0.003%/V

Zero Drift 

± 0.01%/°C or ±0.02°C/°C

Span Drift 

± 0.01%/°C or ±0.02°C/°C

Long Term Drift 

± 0.05%/Year

Cold Junction Drift 

± 0.03°C/°C

Excitation Current, RTD 

0.1 mA

Sensor Lead Resistance, RTD 

500 Ohm max.

Sensor Lead Resistance Effect

0.005°C/Ohm

Sensor Lead Resistance, T/C 

10,000 Ohm max.

Open Circuit Detection 

Upscale / Downscale

Load Capability 

Vbat-5V / 20 mA

Startup Time 

5 sec.

Warmup Time 

2 Min.

Ambient Operating Temp. 

-40...+ 85°C

Isolation

500 VDC / 1500 VAC

Ingress Protection

IP30

Storage Temperature 

-40...+100°C

Housing Material 

Makrolon

Housing Dimension W x H x D 

22.5 x 75 x 99 mm (0.89” x 2.92” x 3.9”)

SENSOR RANGES

Sensor type  

Temp. Min. °C  

Temp. Max. °C  

Span Min. °C  

K (NiCr-Ni) 

-270

1370

50

J (Fe-CuNi) 

-200

1200

50

L (DIN Fe-CuNi) 

-200

900

50

T (Cu-CuNi) 

-270

400

50

U (DIN Cu-CuNi) 

-200

600

50

E (NiCr-CuNi) 

-270

1000

50

S (Pt10%Rh-Pt) 

-60

1760

250

R (Pt13%Rh-Pt) 

-60

1760

250

B (Pt30%Rh-Pt6%Rh) 

0

1820

600

Pt100 IEC751 

-200

850

25

Pt250 IEC751

-200

850

25

Pt500 IEC751 

-200

850

25

Pt1000 IEC751 

-200

850

25

Ni100 IEC751 

-60

250

25

Ni500 IEC751 

-60

250

25

Ni1000 IEC751 

-60

250

25

Cu10 

-200

250

25

Cu100 

-200

250

25

C (W5%Re-W26%Re) 

0

2300

150

D (W3%Re-W25%Re) 

0

2300

150

N (NiCrSi-NiSiMg) 

-270

1300

50

mV 

0

1000

10

Ohm 

0

9999

100


Download a printable specifications sheet here.


  ORDER INFORMATION
 


Example:
Model Mp88710 -IF
Options:
-IF = Interface and software


  DOWNLOADS
 


Mp82700(-H), Mp82710, Mp82800(-R), Mp82810(-R), Mp88700(-H),
Mp88710, Mp88800(-R) and Mp88810(-R)
- October 2008 (300kb)
Manuel d'utilisation MP-transmetteurs - 12/05/2000 (190kb)




  SOFTWARE

 



  Serial interface software V3.5 August 2008 (4.5 MB)
 

This software program is suitable for all microprocessor based transmitters using S-Products' interface for connection to your computer's serial port.

SPRO_MpUser_V35.exe

Please read the readme.1st or install.html file included in zip file for installation instructions.


  USB interface software V3.5  August 2008 (4.8MB)
 

This software program is suitable for all microprocessor based transmitters using S-Products' interface for connection to your computer's USB port.

SPRO_MpUser_V35 (USB).exe

Please read the readme.1st or install.html file included in zip file for installation instructions.


(c) 2007- S-Products | home | contact us | privacy policy| disclaimer