S-Products.com | Products

MP88800-R PRODUCT OVERVIEW

The Mp88800-R is a economical µP-based 2-wire DIN-Railmounting transmitter. It has been specially designed to provide you with an economic alternative to stocking different transmitters for common Pt100 ranges. Fully-scalable and Fully Linearized. The Mp 88800-R is quickly and easily programmed using your PC and our interface and software.

Mounting on a standard DIN rail, the Mp 88800-R features include small minimum span; complete linearization; wide power supply capability; selectable upscale/downscale; ATEX and FM approved versions available, high loop-drive capability and 5 year warranty against failure.
	Mp88800-R features 2-wire microprocessor based rail-mount transmitter Mp 88800-R • Microprocessor-Based • Pt100 (RTD) Input only • Fully Linearized • ATEX and FM approved versions available • High Accuracy • 5-Year Warranty

SPECIFICATIONS

Input RTD	Pt100
Minimum Span	25°C
Output	4..20 mA or 20..4 mA
Linearization	On / Off
Supply	10..40 VDC, Polarity Protected
Supply Effect	0.02%/V
Max. Ripple	10 V PP. Min Vbat=10 VDC
Zero Drift	± 0.02%/°C or ±0.02°C/°C
Span Drift	± 0.01%/°C or ±0.01°C/°C
Long Term Drift	± 0.1%/Year
Excitation Current, RTD	0.1 mA
Sensor Lead Resistance, RTD	500 Ohm max.
Sensor Lead Resistance Effect	0.01°C/Ohm
Open Circuit Detection	Upscale / Downscale
Load Capability	Vbat-10V / 20 mA
Startup Time	30 sec.
Warmup Time	5 Min.
Ambient Operating Temp.	-40...+ 85°C.
Storage Temperature	-40...+100°C.
Housing Material	Makrolon
Housing Dimension W x H x D	22.5 x 75 x 99 mm (0.89” x 2.92” x 3.9”)

ORDER INFORMATION

Model
MP88800-R
-R = Pt100 input only (default)

Options
IF / CW / EX

Options Explained
-IF = Interface and Software
-EX = Intrinsically Safe Approval
ATEX Ex II 1 G EEx ia IIC T4..T6

DOWNLOADS

Mp82700(-H), Mp82800(-R), Mp88700(-H),
Mp88800(-R) and Mp82850-R - December 2004 (600kb)

Manuel d'utilisation MP-transmetteurs - 12/05/2000 (190kb)

SOFTWARE

Serial interface software V3.5 August 2008 (4.5 MB)

This software program is suitable for all microprocessor based transmitters using S-Products' interface for connection to your computer's serial port.

SPRO_MpUser_V35.exe

Please read the readme.1st or install.html file included in zip file for installation instructions.

USB interface software V3.5 August 2008 (4.8MB)

This software program is suitable for all microprocessor based transmitters using S-Products' interface for connection to your computer's USB port.

SPRO_MpUser_V35 (USB).exe

Please read the readme.1st or install.html file included in zip file for installation instructions.